Bass Boat Seat Interior w/ 61" Bench Seat
- Driver and passenger side two-piece bucket seats
- Back and seat cushions attach separately
- Each bucket seat measures 22" wide
- 17" wide center fold down seat w/ hold down strap
- Center seat folds flat and is designed as a step
Select Your Fishing Seat Package
You can select from two styles of pedestal mount boat seats to customize your bass boat seat interior.
Note: Fishing seat pedestals are not included.
Factory Grade Replacement Seats
- 6 year full replacement warranty on upholstery
- 30oz soft to the touch, marine grade seat vinyl
- Custom molded foam cushions won't break down
- Folding seats use heavy duty, pinchless hinges
- Lean Pro seats won't break down or lose comfort
- Plastic frames with 100% stainless steel hardware
- All mounting hardware is included (stainless)
Stainless Steel Hardware Included:
Note: The pair of bucket seats will arrive in a single package with protective packaging and covered in plastic bags.
1. (2) Aluminum hinges with vinyl covering, pre-installed onto each seat cushion (2 hinge per seat).
2. (4) #12 x 1” stainless screws to attach hinges to seating platform (2 per hinge).
3. (8) #14 x 2” stainless screws to install seat back to rear wall of seating platform (4 per seat back).
4. (8) stainless bolts inserted into the bottom of each fishing seat.
Installing Back Rest & Seat Cushions
Note: Installation hardware is attached under boat seat cushions.
1. Remove any temporary plastic edge protectors from each boat seat cushion by pulling them out of the upholstery. This will not harm the seat, simply grab the edge of the plastic protectors and pull them out.
2. Determine the location of the drivers bucket seat and place the backrest against the rear wall of the seating platform. Screw backrest into back wall of seating platform and you are finished. You may drill additional holes into the plastic frame if necessary, this will not void any warranty or damage the seat.
* If you have ordered a seat grouping with a center fold down seat make sure you line up all your boat seats on the boat’s platform prior to installation to make sure you have enough room to install each seat.
* We recommend that you drill small pilot holes into your boat before installing the screws. This will prevent damage to the fiberglass. Assuming a 3/4” thick back wall our 2” screws will protrude 1/4” through your back wall of your platform once installed.
3. Line the seat cushion up with the installed back rest and determine the spacing between the seat and back rest. The hinge that is attached to the bottom of each seat cushion allows you to adjust the seat forward or back depending on the depth of your platform. There is a matching vinyl piece that is installed with each hinge, determine the location and screw the hinge and the vinyl to the platform. The vinyl piece will hide the aluminum hinge once it is installed.
4. If you have a center fold down seat, determine where you want it to mount and install it with the attached hinge and vinyl piece just like you did with the bucket seat cushion.
Installing The Pedestal Mount Boat Seats
* Metal t-nuts are inserted into the plastic frames of each fishing seat, please start the bolts by hand before using a screw driver. This will prevent mis-threading of the t-nuts.
Claims are always handled quickly and at no cost to you, call us at 877-295-9522.
We don't pass you off to some other manufacturer, we warranty all of the bass boat seats we sell. We get our customers quick answers and solutions in the rare case you have a problem.
All of our boat seats have a 6 year full replacement warranty, if anything goes wrong we send you brand new bass boat seats without hassle or cost.
We will ask for images of the defects so we can make immediate improvements in our production but we will never wait to send your replacement boat seats, we do not need the used boat seats back before we send you new ones. You are never required to pay shipping.
You are NOT responsible for any shipping damage.
We spend extra money on packaging to ensure your new boat seats will ship safely but there is always the chance rough handling or stacking could damage the upholstery or parts during shipping, if this happens just give us a call at 877-295-9522.
We will send your replacement boat seats to you as soon as you provide us with images.
We do not need the damaged boat seats back before we send you a replacement.
There is never any cost to you in the event of shipping damage, we handle everything as quickly as possible so your project is not delayed.
Shipping is free on any order over $50. Place an order by 4pm EST (Mon - Fri) and in stock seats and accessories will ship the same day! Your items will ship with FedEx and arrive quickly, no signature necessary. You will receive an email with tracking data as soon as your seats ship.
- We will only ship within the contiguous U.S.
- ***If you are looking to purchase items to ship to Canada, please visit https://www.canadapontoon.com/en/
Boat Carpet Orders
Because we custom cut carpet to your size we cannot ship same day, carpet ships within 72 hours.
In order to offer you the best prices we ship all boat carpet orders directly from our carpet mill in Georgia. If you order back to back boat seats and carpet you will receive your boat seats first followed by your carpeting.
Unfortunately we cannot take international orders, no exceptions.
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Our seats have been installed on:
Allison - Aries
BassCat - Bass Hawk - Bullet
Cajun - Challenger - Champion - Charger - Cobra
G3 - Gambler
Laser - Lowe
Phoenix - ProCraft
Skeeter - Sprint - Storm - Stratos
Tracker - Triton